Waterproof Solar LED Ground Marker Lights - 2 Pack Outdoor Driveway Road Stud Lamps for Night Safety & Pathway Guidance | Perfect for Driveways, Walkways, Gardens & Parking Areas

Product Description

Features: SAFE AND RELIABLE: This indicator light can not only avoid the interference of rain and fog to the greatest extent, but also free the driver's sight from relying on the car's lighting, and the visual distance is longer.?REDUCTION OF ACCIDENTS: This LED ground indicator is designed to guide vehicles and pedestrians in the right direction, with a visual distance of up to 500 meters, which can effectively provide drivers with safe driving directions.HIGH BRIGHTNESS: This indicator has a larger reflected light brightness. The reflected light brightness can reach 200 0mcd, which is 6 to 7 times that of ordinary spike lamps, and the lamp beads are larger than 6000cmd.RUGGED AND DURABLE: The durable cast aluminum structure of this lane safety indicator can cope with outdoor environments, is durable and waterproof, and can work continuously for more than 72 hours after the battery is fully charged.ENERGY-SAVING AND ENVIRONMENTAL PROTECTION: This highway signal indicator uses LED as its light source, which is energy-saving. It is charged by solar panels in the sun, automatically charged during the day, and automatically lit at night. Specification: Material: Die-cast aluminum housing + reflective sheet + PCSolar panel: 2.5V/120MA monocrystalline siliconEnergy storage device: 1.2V/600MAH NI-MH/high temperature resistant NI-MH batteryWorking duration: charged a day under standard light strength, it can work for 40 hours; the battery can work continuously for more than 72 hours after being fully chargedLight mode: flashing or constantly brightLight color: WhiteLight source: 6 * 5MM super bright anti-fog LED lightsVisible distance: >500 metersIlluminance: 400-500 lxLife-span: 3-5 yearsWorking environment: -20°C ~ +70°CWaterproof: IP68Static crush resistance: ＞20 tons Installation Steps: 1. Positioning: Firstly, use the ruler to determine the installation position, ensure that the longitudinal position of each position is on a straight line, the installation distance and design requirements shall prevail, and the installation site shall be flat, dry, clean and seamless.2. Mixing glue: using dedicated A glue and B glue, A glue and B glue ratio is 1:1 (such as: 1 kg A glue, 1 kg B glue) glue must be evenly mixed, consistent color.3. Applying glue: the road surface should be cleaned during installation, the glue should be moderate, not only stick to the ground, but also do not overflow too much, about 40 grams of glue per lihgt, apply glue to the bottom of the road sign. Clean up the road debris after installation.4. Patrol: check the installed spike lights after two hours.5. Road closure: It is recommended to close the road for 6 hours to ensure the curing time of the glue. Package list: 2 * Road Ground Lights Note: Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.